How to fix the issue Airpods aren’t Connecting

AirPods generally perform well when set up using the iPhone, iPad, or Apple Watch however, occasionally AirPods users might experience a lot of intermittent disconnections. If this happens it is when the AirPods stop working with each iPhone, iPad, or Apple Watch, and sometimes it will stop connecting and disconnecting frequently and makes them unusable. A simple investigation of this issue is typically enough to fix the issue and allow your pods to connect properly and stop the disconnection. In this article, we’re going to look at how to Fix it if Airpods continue to disconnect. Let’s begin!

Why do my AirPods aren’t connecting?

It’s not something you want to hear yet, but there is a myriad of reasons why AirPods aren’t able to connect to iPhones as well as different Bluetooth devices. It could be an issue with the hardware, a signal quality issue, or an issue with a specific edition of iOS.

AirPod disconnects were quite common during 2017 and 2016 with iOS 10.1 and then came up again in 2018 after the iOS 11.2.6 update. The issue came up three times following an iOS 12.1 update and is likely to be seen it again in the near future. Contact Apple about the issue. Apple and then check for updates in future updates.

Disconnection issues can be attributed to phone calls. A person calls complaining that they don’t hear you clearly, or even at all. You might also find that your AirPods were unable to connect during a conversation. Infrequently, you might see this issue while listening to music or connecting to the in-car Bluetooth.

The issue may be due to the sensors within the AirPods which determine whether they’re within your ears or the microphones. It may be due in part to Bluetooth interference. Whatever the reason we hope that one of the audio fixes below will resolve the AirPod disconnection issue for you.

How do I fix it the issue Airpods aren’t connecting

To prevent the AirPods to not losing the Bluetooth connection, go through the list of possible causes and take them off one at a time.

So, are they running not charging? Did you accidentally disable Bluetooth or picked the incorrect audio output? Do you have a physical issue that only one earbud is experiencing, or is the ear detect system failing or do the AirPods simply require cleaning? Let’s take a look, and determine the cause of the interference with the signal.

Make sure you check the battery level of your AirPods Check the Battery Level of your AirPods. AirPods continue to disconnect

The first thing to take care of is to ensure that you’re AirPods are fully charged. charge. If they’re not running on energy, you won’t hear any sounds.

Read Also :   The DoorDash User Guide On How To Delete Your Credit Card

You can verify your AirPod charging status of your iPhone by doing these things:

  • With the AirPods in the case, remove the lid, and place the case on top of your iPhone.
  • A pop-up window in your iPhone will display the levels of battery.
  • You may also try the battery gadget on your iPhone. Swipe left and right on the home page, after which scroll to the bottom.
  • If you’ve not added the widget for batteries to your iPhone Scroll down until you come to Edit, click the Edit button, then add batteries.
  • The widget also shows you the status of your battery on the other Apple devices, like Apple Watch. Apple Watch.

Check Bluetooth

Verify whether Bluetooth is active on the device that you’re using the AirPods with, or not.

  • For the iPhone or iPad start Control Centre and then check whether Bluetooth is enabled.
  • Alternately, go to Settings and then Settings Bluetooth. There should be an indicator in green to indicate that Bluetooth is turned on or off.

Even Bluetooth is turned on, it’s best to switch off the Bluetooth and turn it back on.

  • In Settings > Settings Bluetooth In Settings > Bluetooth, click on the green switch until it turns white.
  • Then, wait for at minimum 15 seconds before switching Bluetooth off.

It will then say that the AirPods aren’t connected, however, they will reconnect as soon as you choose they are the preferred source of your audio.

Check your audio device settings | AirPods keep disconnecting

It is also important to ensure that you’ve chosen your AirPods as your audio device. This might occur automatically since the AirPods recognize that they’re within your ear. If this hasn’t occurred it is important to adhere to these steps.

If you are listening to songs through your iPhone tap the AirPlay icon that appears under the music track (if you have selected the track). Choose the AirPods from the available options.

If you’re on a call, ensure you are wearing AirPods chosen in the audio options that are displayed on the screen when you call. You can also alter the source of audio when you’re on the call by pressing an icon that represents a speaker.

Read Also :   The Best Kodi Adults Add-ons in 2022 - Content that is uncensored

Remove your AirPods and then reconnect them

“Turning it off and on again” could solve a variety of issues and electronic devices, and AirPods are no exception. AirPods are no different.

  • Place the AirPods in their cases close the lid and then wait for about 15 minutes.
  • Open the lid, then hold and click the setup button located on the rear of the box.
  • Then, wait until the lights turn amber and then turn white.
  • Therefore you’re AirPods are now reset (this applies regardless of whether they’re not you AirPods).
  • In order to connect your AirPods simply place them on an iPhone (make sure that you have Bluetooth activated).
  • Go through the setup choices on the iPhone and you’re done.

Make sure you clean your AirPods. | AirPods keep disconnecting

One excellent method of cleaning your AirPods is to use specially designed AirPods buds to wash the grills of your speakers and crevices.

If you are using the headphones, you can use a microfiber towel specifically designed to clean your device to remove dust and other debris. Similar to this in the event that you do not have the specially designed AirPods buds, you could also make use of a soft toothbrush to gently scrub the grills of your speaker. Take an unclean Microfiber towel and wash it each time you scrub it.

Note

It is possible to gently dampen the cloth or swab with alcohol or water before cleaning it. It is important to ensure that you don’t overuse alcohol or water on the speaker. The speakers are fragile and having an excessive amount of liquid close to the end will only create more damage.

As a side note, making use of any other cleaning tools like tissue paper or a safety pin, or even a bath towel, vacuum cleaners are likely to result in death.

Make use of only 1 AirPod | AirPods continue to disconnect

There are reports that suggest that the issue is less frequent when you only use one earbud. You could also put one in the case that charges also.

You can also configure your AirPods up in a way there is only just one AirPod microphone is utilized.

  • If you have AirPods in the AirPods case open Open Settings > Bluetooth on your iOS device and select AirPods.
  • Click the I, then select Microphone from the menu options.
  • The default setting here is Automatic and comes with the two AirPods with the ability to use a microphone. You can change this option to Always Right or Always Left.
Read Also :   Hacking Snapchat to Get your Streak Back - Tips

Turn off Automatic Ear Detection

AirPods have “Automatic Ear Detection” technology to ensure that they’re operating only within our ear. Users have reported that when they disable this function, AirPods aren’t able to disconnect from iPhone even during a phone call.

Go to Settings, then Bluetooth Click on the “i” button next to AirPods, and then switch off the Automatic Ear Detection.

Disable the Wi-Fi connection on your iPhone

We’re not sure why this might make a difference however certain users have noticed that once they had turned off WiFi on the iPhone the audio-related issue ended. This could be due to the causes of interference from WI-Fi which we’ll explore in the next section.

The sources of Wi-Fi or Bluetooth interference

There are numerous devices that may be causing interference, so it’s possible that one of them is the reason for the drop in your audio. Here are some suggestions that you can try to stop it.

  • Make sure you are closer to the Bluetooth device, such as the iPhone for example, should the problem occur you are on the phone.
  • Avoid microwaves and fluorescent lighting and Wireless video cameras (such used as monitors for babies) and wireless phones.
  • Switch devices that are able to utilize Bluetooth to use the band 5GHz to make available the 2.5GHz band to use for Bluetooth.

On an Mac | AirPods are not connecting

If the issue is due to the AirPods on your Mac Check your Sound settings within the System Preferences in your Mac.

  • Select System Preferences > Sounds. Then, Under the tab Output,, select your AirPods.
  • Do similar things on the Input tab.

If you’re finding that the problem occurs when you use FaceTime as well as audio-based calls that you make by your Mac and calls from people reporting that your voice isn’t clear, or that they aren’t able to hear your voice. It could be due to Bluetooth needing to send and receive audio. This could result in audio quality varying from high-fidelity to low fidelity, too.

Conclusion

Alright, That was all Folks! I hope you enjoy the article about AirPods not connecting and find it useful to you. Let us know what you think about the article. If you have any other questions regarding this article. Let us know in the comment section below. We’ll get back to you in the near future.

Have a Great Day!

One thought on “How to fix the issue Airpods aren’t Connecting

  1. It’s really nice and meaningful about How to fix the issue Airpods aren’t Connecting. it’s really cool blog. Linking is very useful thing.you have really helped lots of people who visit blog and provide them useful information.

Leave a Reply

Your email address will not be published.